Model Is YPB3505A Convey Broken Materials Material Transfer Pump
1. GM PVC material transfer PAC pump diaphragm metering pump
chemical dosing pump is compact structure, no leakage, safe
operation and easy to maintain.
2. The flow can be adjusted by controling the speed regulating
handwheel. And the multi-layer composite structure diaphragm has
longer service life.
3. Medium can be corrosive and high viscosity, and should be
without solid and with viscosity range of 0.3~800 mm2/s.
4. The chemical dosing pump is widely used in petroleum, chemical
industry, spinning, food industry, papermaking, atomic energy,
power plants, plastics, pharmacy, water works, environmental
protection or other industries.
5. PTFE, PVC, SS304, SS316 materials pump bodies could be chosen to
transfer liquids for all kinds of applications.
Working principle
Working principle of single-acting vane pump The pump is composed
of rotor, stator, vane, oil distribution plate and end cover. The
inner surface of the stator is a cylindrical hole. There is an
eccentricity between the rotor and the stator. The blades can slide
flexibly in the slots of the rotor. Under the action of the
centrifugal force during the rotation of the rotor and the pressure
oil at the root of the blade, the top of the blade is attached to
the inner surface of the stator, so two adjacent blades, the oil
distribution plate, the stator and the rotor Formed a sealed
working cavity.
When the rotor rotates in a counterclockwise direction, the blades
on the right side of the figure extend outward, the volume of the
sealed working chamber gradually increases, and a vacuum is
generated, so oil is sucked in through the oil suction port 6 and
the upper window of the oil distribution plate 5.
And on the left side of the picture. The blades retract inward, and
the volume of the sealed cavity is gradually reduced. The oil in
the sealed cavity is pressed out through another window of the oil
distribution plate and the oil pressure port 1 and output to the
system. This kind of pump sucks oil and pressurizes oil once during
one revolution of the rotor, so it is called single-acting pump.
The rotor is subjected to radial hydraulic unbalanced force, so it
is also called unbalanced pump, and its bearing load is relatively
large. The displacement of the pump can be changed by changing the
eccentricity between the stator and the rotor, so this type of pump
is a variable pump.
| model no | #35 |
| max theoretical capacity | 105m³/h |
| max capacity | 20-50m³/h |
| max recommended speed | 70 S/Min |
| theoretical flowing capacity | 25L/Sev |
| solid particle transport | 85mm |
| min recommended pipe interface(outlet) | 250mm |
| motor power | 5.5kw |
| motor brand | Simens |
| Reducer brand | JIE |
